‘CYCLIST REJOIN CARRIAGEWAY’ Dia. 966 - Post Mounted Sign - Composite Inc. Channel/ RA2

Product code: 15254-597
Start Traffic
Made To Order Dispatches in 7-10 Days

£14.08 excl. VAT

£16.90inc. VAT

Buy in bulk and save

10 or more £13.38 excl. VAT
10 or more £16.06 inc. VAT
20 or more £12.81 excl. VAT
20 or more £15.37 inc. VAT

Sign Size: 511x232mm | 30mm X-Height

511x232mm | 30mm X-Height
597x173mm | 30mm X-Height
682x310mm | 40mm X-Height
796x230mm | 40mm X-Height
995x288mm | 50mm X-Height
852x388mm | 50mm X-Height

Key features

Specification

Size guide

If you’re looking to order large quantities, call us on (0)1905 794875 for more information.
View the product details below to learn more about this product.

You may also need the following:

‘CYCLIST REJOIN CARRIAGEWAY’ Dia. 966 - Post Mounted Sign - Composite Inc. Channel/ RA2

Top features

R2 Class 2 Reflectivity
Post Mountable
Composite Substrate

View more features

Description

‘CYCLIST REJOIN CARRIAGEWAY’ Dia. 966 - Post Mounted Sign - Composite Inc. Channel/ RA2

This ‘Cyclist Rejoin Carriageway’ post mounted sign should be used in areas where the cyclist lane is coming to a close and cyclist are required to rejoin the carriageway.

This sign is bright blue in colour making it hard to avoid and should be mounted at an appropriate height for a cyclist to see. Clear capitalised wording on the sign sends a clear message to the cyclist reading it ordering them to rejoin the carriageway immediately.

These signs are made from a composite backing with RA2 reflective grade material, this allows these signs to be seen in the dark when a headlight or bike light passes over it.

This sign is available to you in six sizes, each with dual mounting rails on the rear allowing it to be mounted on a signpost of your choice & seen in any environment required whether it be a small sign on the roadside or a large sign placed towards the end of a cycle route.

£14.08 excl. VAT

£16.90inc. VAT

Key features

R2 Class 2 Reflectivity

R2 (RA2) Reflectivity makes this sign suitable for use with vehicles and reflects around 32% of the light that hits the surface back to the driver. This material is also called HIP which stands for high intensity prismatic.

Post Mountable

Twin rear channels mean the sign face can be clamped in place and will not twist once secured. The clamps are available to supply separately and are not included with the sign face.

Composite Substrate

The backing of the sign is made from a rigid plastic sandwiched between two skins of aluminium making the sign strong and very durable. As there is no steel it will not rust giving a great lifespan.