+44 (0)1905 794875
Wholesale Prices
VAT
In stock items despatched same day when ordered before 2pm!
Your basket is currently empty.
If you’re looking to order large quantities, call us on (0)1905 794875 for more information.
The walking man marking when used in a carpark is often there to indicate to motorists that pedestrians may be walking in this area. It is also frequently seen in distribution hubs to indicate areas where pedestrians have priority over vehicles.
Our thermoplastic walking man symbol is fast and easy to apply, allowing you to create quick and easy pedestrian safety areas. If purchased alongside our thermoplastic rolls a complete path marking system can easily be created. The rolls allow you to create clean outlines that pedestrians know to stay within.
We have these markings available in various sizes and colours, these can be used alongside arrows or exit signage to indicate proper evacuation routes in large complexes.
We have white and yellow markings ready to order online if you need other colours we are here to help. You may want to use these additional colours to mark our separate walkways to different areas of your operation or to dictate different levels of safety equipment requirements.
Applying our walking man / pedestrian symbol markings is very easy. Firstly the area must be cleaned of all loose debris, oil, grease and salts. Once this is done you are ready to get going. If your road surface is old tarmac, concrete or block paving then you will need to use our fast-drying primer.
Once you have fully prepped the surface the marking can be set out. Once you are happy with the marking positioning a heat gun can be used to melt the marking to the road surface. For additional traction glass bead can be sprinkled over the surface, this is fused into the marking with the further application of heat.
Thermoplastic on block paving is known to be more difficult to apply and has a substantially shorter lifetime than on bituminous surfaces, such as tarmac.
Block paving is not a solid structure. Most of the time, they are put down and sand is added into the grooves, so over time when moisture creeps in as well as moss, movement can be made within 2 blocks, making the material crack and fail.
Cannot find the bicycle symbol marking you are looking for? We are here to help, our trained staff are available throughout the day to take your calls or answer your messages. They will ensure that you get the best marking at the best price. Our phone lines are open during normal office hours.
No special knowledge, talent or years at art school required, just a clean surface and a gas heat gun.
These markings always look good due to their pre-cut design
Minimal surface preparation is required for these markings, with a worst-case scenario requiring an application of primer.
Apply glass bead to enhance the traction of your marking, both for pedestrians and vehicles.
A European standard that discusses road marking materials and their performance under various tests.
