Thermoplastic Zebra Crossing Panels (1m x 500mm)

Thermoplastic Zebra Crossing Panels (1m x 500mm) (Red - RAL 3020)

Thermoplastic Zebra Crossing Panels (1m x 500mm) (Jet Black - RAL 9005)

Thermoplastic Zebra Crossing Panels (1m x 500mm) (White - RAL 9003)

Product code: 13394-1007

Thermoplastic Zebra Crossing Panels (1m x 500mm)

Start Traffic

View the product details

£14.31 excl. VAT

£17.17inc. VAT

Buy in bulk and save

40 or more £12.88 excl. VAT
40 or more £15.46 inc. VAT
80 or more £11.59 excl. VAT
80 or more £13.91 inc. VAT

In Stock

Colour: Signal Yellow - RAL 1003

Size guide

Signal Yellow - RAL 1003
Red - RAL 3020
Jet Black - RAL 9005
White - RAL 9003

Returns are restricted on this item

Call us for bulk quantities (0)1905 794875
Made to order: This product is made to order and, therefore, has a restricted returns policy. Please see our returns policy for more details.

You may also need the following:

£14.31 excl. VAT

£17.17inc. VAT

Thermoplastic Zebra Crossing Panels StartMark

Putting a zebra crossing down is now easier than ever with our thermoplastic panels. One Panel is 1000x500mm, these are ordered as single panels to make up whatever size of crossing you require.

We recommend including glass bead and primer with your order. The glass bead improves the traction and reflectivity of the crossing, and the primer ensures that the markings will adhere to concrete or worn tarmac effectively.

Our road markings are ideal for all pedestrian areas, they are road grade markings that are hard wearing and will last a long time. Some of the most popular applications are at schools, hospitals, car parks, factories, warehouses and depots.

If you want to create a yellow and white high contrast crossing like the one shown here, you will need to order double the amount of primer, and glass beads. If you have any questions at all just contact our sales team.

How Many Thermoplastic Panels do I Need?

Road Width in Metres	Panels Required	Glass Beads Required in Kg	400ml Primer Tins Required
2	3	1	1
2.5	3	1	1
3	4	1	2
3.5	4	1	2
4	5	1	2
4.5	5	1	2
5	6	2	2
5.5	6	2	2
6	7	2	3
6.5	7	2	3
7	8	2	3
7.5	8	2	3

Thermoplastic Sheet

A Single 1 metre by 500mm thermoplastic sheets.

Spray Primer

Seals the existing surface ready for installation.

1Kg Glass Beads

Provides improved traction and visibility.

What Else Will I Require?

Outside of the above-mentioned parts, you should only require PPE equipment, a heat gun, broom, and propane gas. The heat gun is available to buy on our site.

Have questions About our Thermoplastic Zebra Crossing?

Give us a call on 01905 794 875, our sales team will be happy to help you with any questions you may have. We are able to supply Zebra Crossings in any colour or size so please feel free to contact us with special requests.

Before Installation, we recommend washing and sweeping the area to remove any grease, oil and loose debris. More thermoplastic installation information can be found here.

FAQs

How to remove pre-existing road markings

Thermoplastic

Removing Thermoplastic can be done a few ways. With enough pressure a water blaster can be used, or a sandblaster. Other ways include using a lance. The Compressed air will burn off the material. Or depending on if you have the kit available, use a scabbler. It will act as a sort of Jackhammer and break apart the material away from the road surface. In situations where the material is heavily trafficked and worn down closer to the substrate, removal is not necessary, and fresh Thermoplastic can be applied over the top. If the material still has a lot of body or a good level of thickness to it, removal is to be carried out first.

MMA/EPOXY

Strong solvents may not be useful for larger quantities of MMA that may be required for Road Markings. Some sort of abrasion or grinding equipment would be required for a material as durable as MMA/epoxy. It will wear the material down to the underlying substrate, ready for re-applying fresh product.

How to identify pre-existing road markings

Thermoplastic road markings will be softer and can be chipped and carved away with force with a hand tool, such as a screwdriver or chisel. If you can remove a small amount, test with a small flame from a lighter and see if it melts/becomes fluid. If it does, this implies it is a thermoplastic marking.
MMA material is much tougher, and the curing process cannot be reversed. It will remain solid and should not be exposed to elevated temperatures as it gives off toxic odours when burning. Due to its higher durability, you should not be able to carve or pry it away using a hand tool.
Other markings, such as paints or coatings, are harder to identify, as they come in different forms, such as oil-based, water-based, and epoxy paints. In these situations, it is advised that disclosure be requested from the client. In any scenario of uncertainty, consult with the client and gain their insight regarding the pre-existing markings that are present.

Can you install these markings on block paving?

We cannot guarantee the results of laying thermoplastic markings on block paving. This is due to the moisture often present between each block and the movement the blocks experience in relation to each other as traffic passes over them.