Quickfit Endurasign
Slow Wet Tar Sign QuickFit EnduraSign 7010.1 | 1050x750mm
Slow Wet Tar Sign QuickFit EnduraSign 7010.1 | 1050x750mm
Slow Wet Tar Sign QuickFit EnduraSign 7010.1 | 1050x750mm
Slow Wet Tar Sign QuickFit EnduraSign 7010.1 | 1050x750mm
Slow Wet Tar Sign QuickFit EnduraSign 7010.1 | 1050x750mm
Slow Wet Tar Sign QuickFit EnduraSign 7010.1 | 1050x750mm

Slow Wet Tar Sign QuickFit EnduraSign 7010.1 | 1050x750mm

Product code: 15827 View the product details
£19.98 excl. VAT
£23.98inc. VAT
Buy in bulk and save
  • 10 or more £19.58 excl. VAT
  • 10 or more £23.50 inc. VAT
  • 20 or more £19.18 excl. VAT
  • 20 or more £23.02 inc. VAT
In Stock
Title: Default Title

  • Call us for bulk quantities (0)1905 794875

  • View the product details below to learn more about this product.

You may also be interested in the following:

Slow Wet Tar Sign QuickFit EnduraSign 7010.1 | 1050x750mm
£19.98 excl. VAT
£23.98inc. VAT
Slow Wet Tar Sign QuickFit EnduraSign 7010.1 | 1050x750mm
Top features
  • Interchangeable Faces
  • Completely Compliant
  • Stacking Design
Description

Slow Wet Tar QuickFit EnduraSign 7010.1 RA1

Our Reduce Slow Wet Tar 7010.1 QuickFit EnduraSign Is used to inform drivers that the current road surface is not finished and that they should slow right down to avoid any potential issues. This slow wet tar road sign is usually used during resurfacing works whilst the surface is still setting.

This temporary road traffic sign comes complete with both the sign face and the high-quality stand. The sign face is 1050mm x 750mm and features an RA1 reflective face, allowing it to be seen in the dark with ease. The stand has pegs at 300mm centres allowing all small form factor quick fit signs with the same hole centres to be used and interchanged freely.

This sign is fully compliant with the regulations set out in the Red Book and Chapter 8 guidelines. For more information on how to properly deploy this sign, we recommend checking out our regulations page.

Key features

EnduraSign_Interchangeable Faces

Interchangeable Faces

Each frame has toggles at 300mm centres. This allows any standard quickfit sign to fit with ease. No longer is a sign written off once the face becomes worn or scratched. Spare faces are available off the shelf from Start Traffic.

EnduraSign_Completely Compliant

Completely Compliant

Of course, these signs meet all requirements for road signs to be used on the road. With Class 1 RA1 reflective faces and proper ground clearance, these signs meet all requirements of The Red Book.

EnduraSign_Stacking Design

Stacking Design

Save space in storage and in transport. This sign can be stacked flat, or stood up, with and without faces applied. Each frame locks onto the next making the EnduraSign QuickFit very stable and easy to transport.

EnduraSign_Compact Format

Compact Format

At only 50 millimetres tall when laid flat, this sign takes up less space than other sign formats. This frees up space for tools and other equipment, especially important in smaller utility works vehicles.

EnduraSign_Lightweight

Lightweight

At only 2.8 kilos the QuickFit EnduraSign will not add excessive weight to vehicles saving 3.85 kilos per sign when compared to its nearest counterpart. Are your current road work signs weight-efficient?

EnduraSign_Ergonomic Design

Ergonomic Design

A ‘handy’ handhold at the top of the sign makes caring easy, unlike traditional steel frames these signs have no sharp edges making cut hands a thing of the past. Several units can be carried at once with ease.

EnduraSign_Spare Parts Available

Spare Parts Available

All parts including the frame, toggles, and faces are available separately so a damaged part does not mean the whole sign is written off. We carry stock of all components saving you money and reducing waste.

EnduraSign_Ballast Options

Ballast Options

Compatible with standard sand bags, or with the specially designed EnduraSign Ballast. This special weight can be stacked to increase wind resistance drastically. It is also compatible with metal frames.

EnduraSign_High-Quality Sign Faces

High-Quality Sign Faces

High quality printed vinyl sign faces with RA1 reflectivity on a 3mm plastic backing means that these signs are not only easy to see in the dark, they are also hard-wearing and cost-effective.

EnduraSign_Fast Deployment

Fast Deployment

A kick-out leg allows this sign to be deployed in seconds, making it instantly stable, needing only ballast. Signs can be stored and transported, stacked with faces attached for even faster deployment if required.

EnduraSign_Ultra Tough

Ultra Tough

The QuickFit Endurasign is flexible and highly durable by design. It will flex rather than snap, it can withstand being dropped from a height and being run over and still get back up to fight another day.

EnduraSign_100% Recyclable

100% Recyclable

At the end of its useful life, you can recycle any worn out parts. Start Traffic works with all manufacturers of components within the QuickFit EnduraSign, which use these to create brand new products.

EnduraSign_Brand It Your Way

Brand It Your Way

Want your sign in your company colours, No problem! We can brand your frames with your logo, and have them made entirely in a different colour. This is a great way to stop other contractors from scooping them up. Customised frames require a minimum of 150 units and will require an additional 4 weeks lead time.

EnduraSign_Non-Conductive

Non-Conductive

With a fully plastic frame and face, these signs are non-conductive, making them safer for use around live cables. The construction also means the signs have no scrap value making them less tempting to scrap metal thieves.

Ballast Requirements for Windspeed Categories

Refer to this guide to determine the amount of ballast/weight required for your sign faces to meet BS 8442:2015 Miscellaneous road traffic signs and devices requirements.

Assembled Signface C: 8.7m/s (19mph) B: 17.6m/s (39mph) A: 26.3m/s (58mph)
750mm Triangle None 8kg / EnduraSign Ballast: 1 22kg / EnduraSign Ballast: 3
600mm Square None 7kg / EnduraSign Ballast: 1 21kg / EnduraSign Ballast: 3
750mm Circle None 5kg / EnduraSign Ballast: 1 17kg / EnduraSign Ballast: 2
1050 x 750mm Rectangle None 13kg / EnduraSign Ballast: 2 36kg / EnduraSign Ballast: 4
600 x 450mm Rectangle None 4kg / EnduraSign Ballast: 1 13kg / EnduraSign Ballast: 2
1050 x 450mm Rectangle None 7kg / EnduraSign Ballast: 1 20kg / EnduraSign Ballast: 2
750mm Triangle + Supplementary plate None 9kg / EnduraSign Ballast: 1 26kg / EnduraSign Ballast: 3
Need Help Quick?

Get Help Finding The Perfect Quick Fit Signage For Your Needs

Struggling to find the right quick-fit signage for your needs? Or are you looking for something bespoke? we are here to help you! Call us today on 01905 794 875 and get a great deal on your signage with help from our excellent support team.

Contact Us
Alternatives

Alternatives to this 'Slow Wet Tar Sign QuickFit EnduraSign 7010.1'

Slow Wet Tar Sign - Zintec Metal Sign Dia 7010.1 Face | 1050x750mm
Slow Wet Tar Sign - Zintec Metal Sign Dia 7010.1 Face | 1050x750mm
£17.08 excl. VAT
£20.50inc. VAT
Start Traffic
Slow Wet Tar' Quick Fit Sign Dia 7010.1 (face only) | 1050x750mm
Slow Wet Tar' Quick Fit Sign Dia 7010.1 (face only) | 1050x750mm
£23.04 excl. VAT
£27.65inc. VAT
Start Traffic

Customers Also Viewed These Products: