20mph Sign QuickFit EnduraSign Dia. 670 | 750mm

20mph Sign QuickFit EnduraSign Dia. 670 | 750mm

Product code: 15817

Start Traffic

View the product details

£35.41 excl. VAT

£42.49inc. VAT

Buy in bulk and save

10 or more £34.70 excl. VAT
10 or more £41.64 inc. VAT
20 or more £33.99 excl. VAT
20 or more £40.79 inc. VAT

More Due Soon

Title: Default Title

Default Title

Call us for bulk quantities (0)1905 794875
View the product details below to learn more about this product.

'20mph' QuickFit EnduraSign Dia. 670 750mm RA1

This 20mph 670 QuickFit EnduraSign is part of our new lineup of high-quality plastic QuickFit EnduraSigns. It is ideal for deployment on street works where traffic speeds need to be kept low for worker safety.

This 20 mph chapter 8 compliant sign system comes supplied with an RA1 reflective face and the plastic heavy-duty QuickFit EnduraSign stand with four locking toggles. This allows almost any quick fit face to be used with the stand so long as it has 300mm centres including many other speed limit signs. Alternative sign faces can be found in our quick fit signs category.

This new sign system is fully compliant with guidelines set out by the DFT for temporary road signs. More guidance for this can be found on our regulations page.

Key features

Interchangeable Faces

Each frame has toggles at 300mm centres. This allows any standard quickfit sign to fit with ease. No longer is a sign written off once the face becomes worn or scratched. Spare faces are available off the shelf from Start Traffic.

Completely Compliant

Of course, these signs meet all requirements for road signs to be used on the road. With Class 1 RA1 reflective faces and proper ground clearance, these signs meet all requirements of The Red Book.

Stacking Design

Save space in storage and in transport. This sign can be stacked flat, or stood up, with and without faces applied. Each frame locks onto the next making the EnduraSign QuickFit very stable and easy to transport.

Compact Format

At only 50 millimetres tall when laid flat, this sign takes up less space than other sign formats. This frees up space for tools and other equipment, especially important in smaller utility works vehicles.

Lightweight

At only 2.8 kilos the QuickFit EnduraSign will not add excessive weight to vehicles saving 3.85 kilos per sign when compared to its nearest counterpart. Are your current road work signs weight-efficient?

Ergonomic Design

A ‘handy’ handhold at the top of the sign makes caring easy, unlike traditional steel frames these signs have no sharp edges making cut hands a thing of the past. Several units can be carried at once with ease.

Spare Parts Available

All parts including the frame, toggles, and faces are available separately so a damaged part does not mean the whole sign is written off. We carry stock of all components saving you money and reducing waste.

Ballast Options

Compatible with standard sand bags, or with the specially designed EnduraSign Ballast. This special weight can be stacked to increase wind resistance drastically. It is also compatible with metal frames.

High-Quality Sign Faces

High quality printed vinyl sign faces with RA1 reflectivity on a 3mm plastic backing means that these signs are not only easy to see in the dark, they are also hard-wearing and cost-effective.

Fast Deployment

A kick-out leg allows this sign to be deployed in seconds, making it instantly stable, needing only ballast. Signs can be stored and transported, stacked with faces attached for even faster deployment if required.

Ultra Tough

The QuickFit Endurasign is flexible and highly durable by design. It will flex rather than snap, it can withstand being dropped from a height and being run over and still get back up to fight another day.

100% Recyclable

At the end of its useful life, you can recycle any worn out parts. Start Traffic works with all manufacturers of components within the QuickFit EnduraSign, which use these to create brand new products.

Brand It Your Way

Want your sign in your company colours, No problem! We can brand your frames with your logo, and have them made entirely in a different colour. This is a great way to stop other contractors from scooping them up. Customised frames require a minimum of 150 units and will require an additional 4 weeks lead time.

Non-Conductive

With a fully plastic frame and face, these signs are non-conductive, making them safer for use around live cables. The construction also means the signs have no scrap value making them less tempting to scrap metal thieves.

Ballast Requirements for Windspeed Categories

Refer to this guide to determine the amount of ballast/weight required for your sign faces to meet BS 8442:2015 Miscellaneous road traffic signs and devices requirements.

Assembled Signface	C: 8.7m/s (19mph)	B: 17.6m/s (39mph)	A: 26.3m/s (58mph)
750mm Triangle	None	8kg / EnduraSign Ballast: 1	22kg / EnduraSign Ballast: 3
600mm Square	None	7kg / EnduraSign Ballast: 1	21kg / EnduraSign Ballast: 3
750mm Circle	None	5kg / EnduraSign Ballast: 1	17kg / EnduraSign Ballast: 2
1050 x 750mm Rectangle	None	13kg / EnduraSign Ballast: 2	36kg / EnduraSign Ballast: 4
600 x 450mm Rectangle	None	4kg / EnduraSign Ballast: 1	13kg / EnduraSign Ballast: 2
1050 x 450mm Rectangle	None	7kg / EnduraSign Ballast: 1	20kg / EnduraSign Ballast: 2
750mm Triangle + Supplementary plate	None	9kg / EnduraSign Ballast: 1	26kg / EnduraSign Ballast: 3

Need Help Quick?

Get Help Finding The Perfect Quick Fit Signage For Your Needs

Struggling to find the right quick-fit signage for your needs? Or are you looking for something bespoke? we are here to help you! Call us today on 01905 794 875 and get a great deal on your signage with help from our excellent support team.

Alternatives

Alternatives to this '20mph Sign QuickFit EnduraSign Dia. 670'

20mph Sign - Zintec Metal Sign Face | 750x750mm

£16.38 excl. VAT

£19.66inc. VAT

Start Traffic

20mph | Quick Fit Sign Face Dia. 670 (face only) | 750mm

£15.43 excl. VAT

£18.52inc. VAT