- £54.11 Ex VAT
- Inc VAT: £54.11
36015
- Secure Shopping High Security Checkout.
Available Options
JSP EVO Alta BaseWorker Wheel Ratchet Safety Helmet Vented
The BaseWorker is the latest addition to the Alta range, it comes with new styling and features that really set it apart from the rest of the EVO range. The Alta BaseWorker is for operators who do not work at height and, as such, includes a harness that meets the requirements of EN 397. This means that the harness breaks away when subjected to forces between 150 and 250N, enough to keep your helmet on if you trip, but not so strong that you could become entangled or strangled by it.
As per the rest of the Alta range of helmets, this helmet is bursting with new features; most notable is its shape, which has done away with the traditional micro peak design seen on the EvoLite range. In addition to this, an interchangeable front panel has been included, allowing you to quickly change out branding or even install an ID badge version should you require it. A new satin finish makes the ABS shell look very modern, especially as it compliments the new black vents, clips and integrated torch retainers.
Although there are a lot of new features on this helmet, some old favourites have been included that have been tried and tested on the rest of the Evo range. The ever-popular and dependable accessory slots that sit on either side of the helmet allow Sonis ear defenders to be clipped on, as well as safety visors from the JSP range. A nice added touch to these accessory slots, which is new to the Alta range, is a blanking plate that covers over the slot when not in use; this is a welcomed addition as it blocks out dust and water.
Key Features Of The JSP Evo Alta Baseworker Vented Safety Helmet
Vented
This helmet features air vents along the top ridge, allowing hot air to circulate freely out of the helmet, drawing in cooler air. This convection cools the helmet interior.
Swap Out Panel
The front panel of this helmet can be swapped out for an ID card version or even for a custom-branded front panel, allowing you to subcontract with appropriate branding.
Wheel Ratchet Adjuster
The JSP Revolution Wheel Ratchet makes adjusting your helmet quick and easy, ensuring a secure fit.
Chamlon Sweatband
Includes an easy-to-replace Revolution Flex Extended Sweatband. It is dermatologically tested and wicks away sweat keeping your forehead dry and helmet comfortable.
Universal Accessory Slots
Surefit universal accessory slots allow you to use JSP’s range of ear defenders and visors without compromising the performance or comfort of the helmet.
Reflectives Available
Reflective kits are available, allowing you to make this helmet stand out in the dark.
Electrically Insulated
Has been tested and can insulate against voltages of up to 1000V.
4-point Chin Strap
The fully adjustable chin strap is designed to release with any force between 150-250N.
Cover Clips
The universal accessory slots on this helmet come pre-fitted with covering clips to prevent water ingress when accessories are not fitted.
Integrated Torch Retainers
Front and rear clips built into the helmet make fitting a head torch securely far easier than ever before.
Crown Impact Resistance
Simulating items falling from directly above, such as dropped tools or rocks, the crown impact test ensures that a 100J blunt force is less likely to cause injury.
Penetration Resistance
Tested with a pointed striker, this helmet can withstand 29j of force at the crown from a pointed object.
EPP Liner
An internal EPP liner gives greater side impact resistance of 25 joules, as required in EN12492. The liner is also vented to keep your head cool while working.
ABS Shell
The ABS shell of this helmet, working together with its EPS liner, allows the EVO Alta to deliver protection whilst remaining lightweight.
All Round Protection
The side, front and rear of this helmet have been tested and shown to withstand 25J of blunt force impact.
Molten Metal
The shell offers protection from molten metal contact, with the shell deformation remaining under 10mm. This can protect from splashes when welding and casting
Temperature Resistant
Tested and suitable for use in an extreme range of temperatures from -40C to +50C without detriment to performance.
Lightweight
At only 500g this helmet is lightweight and comfortable to wear all working day.
Alternatives To The JSP Evo Alta Baseworker Vented Safety Helmet
- Need Something For Working at Height? - Check out the EVO Alta Skyworker compliant to EN 12492.
- Need Something For Working At Ground Level And At Height? - The EVO Alta Dualswitch can switch between EN 12492 and EN397 modes due to a switch on its harness.
- Looking For The EVOLite Skyworker? - You can find the EVOlite Skyworker with Micropeak over here.
Not Sure If The JSP EVO Alta Baseworker Hard Hat Is What You Need?
Give our friendly sales team a call today and see how they can help! They have a vast range of knowledge and can help you find the ideal helmet for your needs; whether you are a mountaineering rescue worker, leisure climber, or working on a wind farm, we have what you need. Call +44 (0)1905 794875 today and get a great deal from one of JSP’s most trusted distributors.
Specifications
Certifications | |
EN Standards | EN397 |
Features | |
Peak Type | Micro Peak |
Ventilation | Vented |
Chinstrap | 4-Point Fully adjustable with Quick Release Button |
Rear Strap Adjustment | Wheel Ratchet |
Material | |
Type | ABS |
Miscellaneous | |
Accessories | A universal attachment slot enables firm fitting of JSP Visors, Ear Defenders and EVOGuard Product Range |
Compatible Products
Customer Questions & Answers
Be the first to ask a question.