- £212.10 Ex VAT
- Inc VAT: £254.52
Choose Option
- Secure Shopping High Security Checkout.
- Installation Available Find out more
Available Options
- Availability: Choose an option...
- Brand: Start Traffic
Duraflex NAL Compatible Self-righting Traffic Bollard
The Duraflex NAL Bollard is the same as the standard Duraflex Bollard but features a spigot compatible with the sleek NAL retention socket.
The beauty of the NAL retention socket is that once the socket has been installed the bollard can be inserted or removed quickly and easily.
The side compartment of the NAL socket houses the locking system for the bollard. This is covered with a plate secured with a security Allen screw.
Key Features
- Single or dual aspect
- Quick and easy to remove
- R3B grade reflectivity
- 6-year delamination Warranty
- 100% recyclable body
- BS 8442 Compliant
This bollard is also available with a bolt down foot design.
What Options Are Available With The Duraflex Bollards?
The Duraflex flexible bollard is available in two body colours, white or black and with a range of sign faces all printed onto a retroreflective sheeting with a 6-year delamination warranty. We have listed some of the more common standard faces below;
- Keep Left D610
- Keep Right D610
- No Entry D616
- Pass Either Side D611
- Go Left D606
- Go Right D606
- Plain Face
- Left D609
- Right D609
- Cycle Lane D955
As standard these bollards come with a plain non-reflective backing to them, however we have the option to have these with a yellow reflective backing or to have them printed with another traffic symbol if required.
Installation of NAL Socket
Step 1
Excavate a hole to 50mm deeper than overall socket depth and 450mm square, then backfill the 50mm depth with pea gravel/shingle this will allow for drainage beneath the socket.
Step 2
Place the retention socket so that the top is flush with the ground level and insert the levelling pole. Make sure the levelling pole is tightened through the side inspection hatch.
Step 3
Pour ST4 or C20 minimum strength concrete around the socket. Leaving 50 - 80mm for surfacing. Using the levelling pole check vertical alignment with a spirit level.
Step 4
Once the concrete has set, remove levelling pole and reinstate finishing surface to leave a flush finish.
Customise Your Bollard
The Duraflex Bollard can be customised to your requirements. If you are looking to use these for off-highway use then these bollards can be printed in your custom colours with your branding.
Can’t Find What You Are Looking For?
Start Traffic is here to help! If you cannot find the bollard you require drop us an email or give us a call on +44 (0)1905 794875.
Specifications
Certifications | |
AccuChecked | ✔ (The specification has been independently checked for accuracy) |
AccuPhoto | ✔ (The photos are of the actual product type that you are ordering) |
Conforms | BS 8442:2015, BS EN 12767:2007 100kph NE4 compliant |
Features | |
Fixing Method | Cast In |
Dimensions | |
Height Above Ground | 975mm |
Height Total | 1125mm |
Width | 340mm |
Depth | 90mm |
Weight | 4.70kg |
Material | |
Colour | Black or white body with yellow reflectors |
Downloads
Customer Questions & Answers
Be the first to ask a question.