Low-Flying Aircrafts Road Post Mounted Sign - Dia 558 R2/RA2 (Face Only)

Product code: 13990-450
Start Traffic
Made To Order Dispatches in 7-10 Days

£27.15 excl. VAT

£32.58inc. VAT

Buy in bulk and save

10 or more £25.79 excl. VAT
10 or more £30.95 inc. VAT
20 or more £24.71 excl. VAT
20 or more £29.65 inc. VAT

Size: 450mm

450mm
600mm
750mm
900mm
1200mm
1500mm

Key features

Specification

Size guide

If you’re looking to order large quantities, call us on (0)1905 794875 for more information.
View the product details below to learn more about this product.

You may also need the following:

Low-Flying Aircrafts Road Post Mounted Sign - Dia 558 R2/RA2 (Face Only)

Top features

R2 Class 2 Reflectivity
Post Mountable
Composite Substrate

View more features

Description

Low-Flying Aircrafts Road Post Mounted Sign - Dia 558 R2/RA2 (Face Only)

The airplane above road sign diagram 558 warns of low-flying aircrafts such as commercial jets or gliders. Its use is for roads around the vicinity of airfields as road users may be caught off guard by their appearance or sudden noise. If low-flying helicopters are to be expected, 558.1 is required.

Where gliders are taking off and landing, the ‘Gliders’ supplementary plate should be used. The use of ‘For’ and a distance is recommended as the positioning of the sign should be sited further back than the standard distance, otherwise, a plane could be virtually overhead before the driver sees a sign. If wig-wag signals are installed to control traffic movement during take-off or landing, signs to diagram 558 and 773 should be the standard distance from the stop line (The standard siting distances can be found in Appendix A of the Traffic Signs Manual, Chapter 4).

This sign is available to order from 450mm to 1500mm, if you can't see the size you want then contact our sales team and we can arrange it for you.

£27.15 excl. VAT

£32.58inc. VAT

Key features

R2 Class 2 Reflectivity

R2 (RA2) Reflectivity makes this sign suitable for use with vehicles and reflects around 32% of the light that hits the surface back to the driver. This material is also called HIP which stands for high intensity prismatic.

Post Mountable

Twin rear channels mean the sign face can be clamped in place and will not twist once secured. The clamps are available to supply separately and are not included with the sign face.

Composite Substrate

The backing of the sign is made from a rigid plastic sandwiched between two skins of aluminium making the sign strong and very durable. As there is no steel it will not rust giving a great lifespan.