🍪 Tasty Cookies: This website uses cookies to improve your experience. You can opt in or out. See our privacy policy. 

Hazard Teeth For Junctions & Speed Limit Changes

  • Hazard Teeth For Junctions & Speed Limit Changes
  • Hazard Teeth For Junctions & Speed Limit Changes
  • Hazard Teeth For Junctions & Speed Limit Changes
  • £6.54 Ex VAT 
  • Inc VAT: £7.85
Product Code
Choose Option
Looking for larger quantities?

  • Secure Shopping High Security Checkout.
  • Installation Available Find out more

Available Options


  • Availability: Choose an option...
  • Brand: Start Traffic

Triangular Hazard Markings & White Hazard Teeth Dia 1062

These white hazard teeth markings are used on the approaching side of speed bumps, speed cushions and speed tables. They come in a variety of sizes to suit many situations.

How many triangle road markings you need will depend on the length and position of the raised area that you are working with. For flat-topped humps that traffic could cross from both sides, arrows should be positioned along both edges in full.

There is plenty of guidance on the proper positioning of hazard triangles in the Chapter 5 Road Traffic signs Manual - Road markings.

Hazard teeth at junction

Key Features Of Our Thermoplastic Crocodile Hazard Teeth

  • Easy Application - No special knowledge, talent or years at art school required, just a clean surface and a gas heat gun.
  • Professional Appearance - These markings always look good due to their pre-cut design.
  • Fast To Install - Minimal surface preparation is required for these markings, with a worst-case scenario requiring an application of primer.
  • Non-Slip - Apply glass bead to enhance the traction of your marking, both for pedestrians and vehicles.
  • Conforms - BSEN 1871
 

Application Of Hazard Teeth Markings

Applying our hazard teeth markings is very easy. Firstly the area must be cleaned of all loose debris, oil, grease and salts. Once this is done you are ready to get going. If your road surface is old tarmac, concrete or block paving then you will need to use our fast-drying primer.

Once you have fully prepped the surface the marking can be set out. Once you are happy with the marking positioning a heat gun can be used to melt the marking to the road surface. For additional traction glass bead can be sprinkled over the surface, this is fused into the marking with the further application of heat.

Thermoplastic On Block Paving

Thermoplastic on block paving is known to be more difficult to apply and has a substantially shorter lifetime than on bituminous surfaces, such as tarmac.

Block paving is not a solid structure. Most of the time, they are put down and sand is added into the grooves, so over time when moisture creeps in as well as moss, movement can be made within 2 blocks, making the material crack and fail.

Anti-slip glass bead

Need Assistance?

Cannot find the road marking you are looking for? We are here to help, our trained staff are available throughout the day to take your calls or answer your messages. They will ensure that you get the best marking at the best price. Our phone lines are open during normal office hours.


Customers Who Viewed This Page Also Viewed


Specifications

Material
TypeThermoplastic
ColourWhite

Downloads


Customer Questions & Answers

Be the first to ask a question.

Contact Us

Weekdays 8:30AM to 5PM

Address:

Start Safety, Drury Lane,
Martin Hussingtree,
Worcester, WR3 8TD

Phone:

+44 (0)1905 794875

Email:

Send Us An Email

Testimonials