Speed Bumps Complete Kits 50mm 10mph & 75mm 5mph
Speed Bumps Complete Kits 50mm 10mph & 75mm 5mph (50mm (10mph) / 3 Metre)
Speed Bumps Complete Kits 50mm 10mph & 75mm 5mph (50mm (10mph) / 3.5 Metre)
Speed Bumps Complete Kits 50mm 10mph & 75mm 5mph (50mm (10mph) / 4 Metre)
Speed Bumps Complete Kits 50mm 10mph & 75mm 5mph (50mm (10mph) / 4.5 Metre)
Speed Bumps Complete Kits 50mm 10mph & 75mm 5mph (50mm (10mph) / 5 Metre)
Speed Bumps Complete Kits 50mm 10mph & 75mm 5mph (50mm (10mph) / 5.5 Metre)
Speed Bumps Complete Kits 50mm 10mph & 75mm 5mph (50mm (10mph) / 6 Metre)
Speed Bumps Complete Kits 50mm 10mph & 75mm 5mph (50mm (10mph) / 6.5 Metre)
Speed Bumps Complete Kits 50mm 10mph & 75mm 5mph (50mm (10mph) / 7 Metre)
Speed Bumps Complete Kits 50mm 10mph & 75mm 5mph
Speed Bumps Complete Kits 50mm 10mph & 75mm 5mph (50mm (10mph) / 3 Metre)
Speed Bumps Complete Kits 50mm 10mph & 75mm 5mph (50mm (10mph) / 3.5 Metre)
Speed Bumps Complete Kits 50mm 10mph & 75mm 5mph (50mm (10mph) / 4 Metre)
Speed Bumps Complete Kits 50mm 10mph & 75mm 5mph (50mm (10mph) / 4.5 Metre)
Speed Bumps Complete Kits 50mm 10mph & 75mm 5mph (50mm (10mph) / 5 Metre)
Speed Bumps Complete Kits 50mm 10mph & 75mm 5mph (50mm (10mph) / 5.5 Metre)
Speed Bumps Complete Kits 50mm 10mph & 75mm 5mph (50mm (10mph) / 6 Metre)
Speed Bumps Complete Kits 50mm 10mph & 75mm 5mph (50mm (10mph) / 6.5 Metre)
Speed Bumps Complete Kits 50mm 10mph & 75mm 5mph (50mm (10mph) / 7 Metre)
Product code: 12774-710

Speed Bumps Complete Kits 75mm 5mph

View the product details
£75.87 excl. VAT
£91.04inc. VAT

Speed Bump Length: In Stock Size guide

  • Call us for bulk quantities (0)1905 794875

  • View the product details below to learn more about this product.

You may also need the following:

Speed Bumps Complete Kits 50mm 10mph & 75mm 5mph
£75.87 excl. VAT
£91.04inc. VAT

75mm Speed Bump Kits

Speed bumps are a great way to control the speed and flow of traffic. Our speed bumps kits are exceptionally easy to install and very cost effective. We supply everything that you need to complete the install including fixings, connectors and drill bit.

Fixings Included

Fixings Included

10 & 5 Mph

5mph

Cable Protector

Cable Protector

Easy To Install

Easy Installation

Recycled

100% Recycled

Reflective

Reflectors Included

office-car-park-speed-bumps

Made with recycled PVC material you will find our speed bumps very hard wearing. Unlike concrete speed bumps that can be “abrupt”, our speed bumps will not scrape cars and are 100% uniform in size and shape. We even offer a great selection of signs to warn of speed bumps that ensure drivers are adequately warned of the speed bumps presence.


Speed Bump Reflectors

Why Choose our Speed Ramp Kits

Superior Quality

Our speed bumps are made from high-quality PVC which are tried and tested to withstand use by 44 tonne HGV's. Center sections also come supplied with twin reflectors for increased visibility at night. The speed bumps are built to last, the yellow sections are moulded from yellow plastic rather than being a painted finish so expect a finish that will stay yellow rather than scrubbing to black after minimal use.

Quality Guarantee

We have been selling speed bump kits for many years. During this time we have refined not only the quality of the speed bump components but the fixings and installation kit. Our speed bumps are some of the best out there. They have been extensively tested and do the job without issue. We are one of the largest speed bump distributors in the UK, offering the best quality and the best prices.


Speed Bump Components

Included In This Kit

  • Inner Section - The Inner is the main component within the speed bump kit, ours are made of part recycled PVC and are moulded either yellow or black.
  • Shoulder Section - The Shoulder or End section finishes off the speed bump kit when being fitted. if you intend on running cables or pipes underneath the bumps then you will not be able to use Shoulders.
  • Universal Fixing - Our universal fixing is designed to be a full proof fixing which works equally well whether being fixed into concrete or tarmac.
  • Connector - Otherwise known as the 'Dogbone' this keeps the bumps together when they are being fitted.
  • 16mm Drill Bit - The 16mm Drill bit is a high-quality drill which is to be used once the hole has been marked and pre-drilled. If being used with our Universal fixing we recommend drilling down 100mm which is the length of the plug.

Optional Add-on Products

  • 10mm Drill Bit (optional) - We can supply our kits with a smaller drill bit to drill through the speed bump fixing points as they are sealed when made and to mark out and pre-drill the main fixing holes.
  • Nut Driver (optional) - If you are fixing lots of speed bumps then we recommend using an Impact Driver or Drill to speed the process up when tightening up the fixings.
Speed Bump Components

Inner Section

Precise measurements of Inner Section

The inner speed bump section is 500mm long and 420mm wide.

Shoulder Section

Precise measurements of Shoulder Section

The shoulder section follows the inners being 420mm wide.

Yellow Stays Yellow

Cross section of cut in half ramp

Quality yellow material surrounds the core of the ramp.


Universal Fixing for tarmac or concrete

Our Own High-Quality Universal Tarmac and Concrete Fixing

We have our own fixing that is great for use on both tarmac (asphalt) and concrete surfaces. The fixing is hard wearing, and far easier to work with than traditional shield anchors and rubber nuts. The fixing works much like a traditional rawl plug, just supersized.

We have tested this fixing on many of our products and it is yet to fail, it is available separately if required for use with custom length kits or your own projects.


Speed Bump Installation Guide

How to install speed bumps using the Cactus Fixing for Tarmac or Concrete

Appropriate PPE Should be worn

place speed bumps in required position

Step 1

Place speed bumps in required position, the ground should be flat and any obstructions or debris should be cleared away.

Drill through fixing slots and mark ground with 10mm drill bit

Step 2

Once the speed bumps are in the appropriate position, drill through fixing slots in the bump and mark the ground with a 10mm drill bit (optional extra).

Move speed bumps and drill down 100mm with 16mm drill bit

Step 3

Move the speed bumps and drill down to the depth of the fixing, (approximately 100mm) using the 16mm drill bit.

Hammer the anchor plugs down flush with the ground

Step 4

Once the holes have been cleaned, hammer the anchor plugs down so that they are flush with the ground.

Place bumps back over fixing holes and tighten bolts into plugs

Step 5

Place speed bumps back over fixing holes and use either a 16mm nut driver (optional extra) or ratchet to tighten the bolts until the speed bumps are secured firmly to the ground.

Video Installation Guide

This video shows how quick and easy our speed bumps are to install on a flat surface.

Have Questions or are looking for something slightly different?

We often get asked for all-yellow speed bump kits, kits without ends, or longer lengths. If you require any of these options, please call us for a kit price. Our customer support team can be contacted on 01905 794 875.

Limitations Of Use

Please ensure that our speed bumps are placed to minimize any wheel turning by HGVs while crossing them, as this can reduce the installation's lifespan considerably. Additionally, driving over them intentionally at excessive speed can also shorten the speed bump's lifespan. If you are installing these at a distribution centre or similar venue where the primary traffic is HGV's please contact us before purchase.

Kit Contents Table

Run Length Actual Length Black Inners Yellow Inners Black Ends Yellow Ends Fixings 16mm Drill Bits Connectors
1 Metre 910mm 0 1 2 0 8 1 4
3 Metre 2870mm 2 3 2 0 24 1 12
3.5 Metre 3360mm 3 3 1 1 28 1 14
4 Metre 3850mm 3 4 2 0 32 1 16
4.5 Metre 4340mm 4 4 1 1 36 1 18
5 Metre 4830mm 4 5 2 0 40 1 20
5.5 Metre 5320mm 5 5 1 1 44 1 22
6 Metre 5810mm 5 6 2 0 48 2 24
6.5 Metre 6300mm 6 6 1 1 52 2 26
7 Metre 6790mm 6 7 2 0 56 2 28
7.5 Metre 7280mm 7 7 1 1 60 2 30
8 Metre 7770mm 7 8 2 0 64 2 32
8.5 Metre 8260mm 8 8 1 1 68 2 34
9 Metre 8750mm 8 9 2 0 72 2 36
9.5 Metre 9240mm 9 9 1 1 76 2 38
10 Metre 9730mm 9 10 2 0 80 2 40

Customers Also Viewed These Products: