Children Crossing Road Marking Multiple Sizes | Fast Delivery

  • Product code: 14348-RWB-1200
  • Start Traffic
  • Dispatches in 1-3 Days
£111.79 excl. VAT
£134.15inc. VAT
Buy in bulk and save
  • 5 or more £108.44 excl. VAT
  • 5 or more £130.13 inc. VAT
  • 10 or more £105.08 excl. VAT
  • 10 or more £126.1 inc. VAT
Symbol Size: 1200x1200mm
Specification Size guide

  • If you’re looking to order large quantities, call us on (0)1905 794875 for more information.

  • First Time Installer? Check Our FAQ's


You may also need the following:


Children Crossing Road Marking 545 - Thermoplastic

Our children crossing road marking is part of our wide selection of preformed thermoplastic symbols. When used outside schools and playgrounds they provide additional warning to motorists that they may find children in the carriageway.

These markings should always be used alongside proper post mounted signage where possible. You can find the Children crossing post mounted sign in our signage section.

Key Features:

  • Easy Application - No special knowledge, talent or years at art school required, just a clean surface and a gas heat gun.
  • Professional Appearance - These markings always look good due to their pre-cut design.
  • Fast To Install - Minimal surface preparation is required for these markings, with a worst-case scenario requiring an application of primer.
  • Non-Slip - Apply glass bead to enhance the traction of your marking, both for pedestrians and vehicles.
  • Conforms - BSEN 1871
Children Crossing Symbol Installed on Tarmac

Choose From An Array of Sizes

When travelling towards a road marking at speed it needs to be intentionally distorted. This ensures that it can still be interpreted correctly by approaching motorists.

Choose from a range of standard sizes:

  • 1200mm x 1200mm
  • 2500mm x 1200mm
  • 3030mm x 1200mm
  • 4040mm x 1600mm
  • 4300mm x 1500mm
  • 5050mm x 2000mm
  • 7070mm x 2000mm

Other sizes are available upon request but may carry a longer delivery time.

Choose From a range of sizes

Application Of Our Thermoplastic Warning Symbols

Applying our preformed thermoplastic warning symbols is very easy. Firstly the area must be cleaned of all loose debris, oil, grease and salts. Once this is done you are ready to get going. If your road surface is old tarmac, concrete or block paving then you will need to use our fast-drying primer.

Once you have fully prepped the surface the roundel can be set out. Once you are happy with the marking positioning a heat gun can be used to melt the marking to the road surface. For additional traction glass bead can be sprinkled over the surface, this is fused into the marking with the further application of heat.

Thermoplastic On Block Paving

Thermoplastic on block paving is known to be more difficult to apply and has a substantially shorter lifetime than on bituminous surfaces, such as tarmac.

Block paving is not a solid structure. Most of the time, they are put down and sand is added into the grooves, so over time when moisture creeps in as well as moss, movement can be made within 2 blocks, making the material crack and fail.

Need Assistance?

Cannot find the road marking you are looking for? We are here to help, our trained staff are available throughout the day to take your calls or answer your messages. They will ensure that you get the best marking at the best price. Our phone lines are open during normal office hours.


Children Crossing Road Marking Multiple Sizes | Fast Delivery
£111.79 excl. VAT
£134.15inc. VAT

Customers Also Viewed These Products: