-
£74.63 Ex VAT
- Inc VAT: £89.56
Choose Option
- 5 or more £72.39 ea. (Ex VAT)
- 10 or more £70.15 ea. (Ex VAT)
- Secure Shopping High Security Checkout.
- Installation Available Find out more
Available Options
- Availability: Choose an option...
- Brand: Start Traffic
Cycles & Pedestrian Route (Cyclist Keep Right) Preformed Thermoplastic Road Marking
The ‘Cycles and Pedestrian Route (Cyclist Keep Right) preformed thermoplastic road marking caters to on foot pedestrians and cyclists, helping them keep to the correct side of the route. We do also offer the opposite cyclist Keep Left marking if you require that instead.
These roundels are found on routes shared by pedestrians and cyclists where a central line has been added.
We suggest using this road marking in combination with a cyclists keep right post mounted sign to highlight the route set for cyclist and pedestrians. Our full range of post mounted road signs can be found in our signage section here.
Key Features
- Easy Application - No special knowledge, talent or years at art school required, just a clean surface and a gas burner. Just place the marking bead side up and apply heat till fully melted onto the surface.
- Professional Appearance - These markings always look good due to their pre-cut design.
- Fast To Install - Minimal surface preparation is required for these markings, with a worst-case scenario requiring an application of primer.
- Non-Slip - No need to apply glass bead to these markings as it comes embedded in them.
- Conforms - BSEN 1871
Choose From An Array Of Sizes
When travelling towards a road marking roundel at speed it needs to be intentionally distorted. This ensures that it can still be interpreted correctly by approaching motorists.
Our range of roundel sizes includes;
- 750mm x 750mm
- 1200mm x 1200mm
- 2500mm x 1500mm
- 4300mm x 1500mm
Other sizes are available upon request but may carry a longer delivery time.
Application Of Cyclists Keep Right Road Marking
Applying our cyclists keep right road marking is very easy. Firstly the area must be cleaned of all loose debris, oil, grease and salts. Once this is done you are ready to get going. If your road surface is old tarmac, concrete or block paving then you will need to use our fast-drying primer.
Once you have fully prepped the surface the roundel can be set out. Once you are happy with the marking positioning a heat gun can be used to melt the marking to the road surface. For additional traction glass bead can be sprinkled over the surface, this is fused into the marking with the further application of heat.
Thermoplastic On Block Paving
Thermoplastic on block paving is known to be more difficult to apply and has a substantially shorter lifetime than on bituminous surfaces, such as tarmac.
Block paving is not a solid structure. Most of the time, they are put down and sand is added into the grooves, so over time when moisture creeps in as well as moss, movement can be made within 2 blocks, making the material crack and fail.
Need Assistance?
Cannot find the road marking you are looking for? We are here to help, our trained staff are available throughout the day to take your calls or answer your messages. They will ensure that you get the best marking at the best price. Our phone lines are open during normal office hours.
Customers Who Viewed This Page Also Viewed
Specifications
| Certifications | |
| Conforms | BS EN 1871 |
| Material | |
| Colour | Blue/White |
| Type | Thermoplastic |
| Miscellaneous | |
| Application | If using glass bead, 250g of glass bead per square metre |
Downloads
Customer Questions & Answers
Be the first to ask a question.
