-
£13.20 Ex VAT
- Inc VAT: £15.84
15101-P-750
- 30 or more £12.87 ea. (Ex VAT)
- 60 or more £12.54 ea. (Ex VAT)
- In Stock Ready To Go In Our Warehouse.
- Same Day Dispatch Order before 2PM.
- Secure Shopping High Security Checkout.
- Availability: In Stock
- Brand: Start Traffic
Traffic Queues LIkely Quick Fit Sign Face (Frame Not Included)
This quick fit format ‘Queues Likely’ sign is always used in combination with the supplementary plate “Queues likely” or “Queues likely on slip road”. This temporary sign is used to give drivers sufficient warning of queues that are being caused by road works or other events.
These are usually placed upstream of works and are especially important where traffic may back up to a blind corner giving very little time for traffic on the carriageway to adjust its speed if it were not warned.
The signs can be placed on either side of the carriageway including the central reservation. For full and proper guidance on the placement of this sign the proper Traffic Signs Manual should be referred to. Links to Chapter 8 and Chapter 4 of these guidelines can be found on our Regulations page.
Our Quick Fit Sign Faces
Be sure to get the right size of sign for your requirements. There are four key elements to consider, which is the size of the sign face, the reflectivity grade, and the mounting hole spacing of the sign faces.
600mm & 750mm Sizes
- 3mm Plastic Backing
- RA1 Reflective Material
- 300mm Hole Centres
900mm Sizes
- 5mm GRP Backing
- HIP Class 2 Reflectivity
- 300mm & 750mm Hole Centres
- Reinforcing Eyelets On Holes
1200mm Sizes
- 5mm GRP Backing
- HIP Class 2 Reflectivity
- 300mm & 750mm Hole Centres
- Reinforcing Eyelets On Holes
1500mm Sizes
- 5mm GRP Backing
- HIP Class 2 Reflectivity
- 750mm Hole Centres
- Reinforcing Eyelets On Holes
Quick Fit Reflectivity Grades
RA1 - Suitable for street works and slower speed limits, this is supplied on all 650m and 750mm sizes.
Class 2 R2 / RA2 / HIP - High-intensity Prismatic, Suitable for high-speed roadworks on motorways, national speed limits.
Measuring Hole Centres
These should match the sign frames that you already have, or are intending to buy. Some of our signs will come with both sets of holes drilled.
Measuring Sign Face Size
The size of the sign face that you need will be dictated by the guidelines in the Chapter 8 guidelines.
Backing Material
Smaller sizes of signs (650mm & 750mm) are available on a 3mm plastic backing board. Larger sizes are fixed to a more rigid GRP backing board. GRP signs are fitted with eyelets for extra strength. If you need Composite or Dibond sign faces please call us.
Need Assistance Finding The Right Sign?
If you need any assistance finding the right sized sign or frame then please give our customer service team a call on +44 (0)1905 794875. We have many other ranges of signs available including Q-signs, “classic” metal sign faces, and permanent signs.
Specifications
Certifications | |
Conforms | The Red Book / Chapter 8 |
Diagram Reference | 584 |
AccuChecked | ✔ (The specification has been independently checked for accuracy) |
AccuPhoto | ✔ (The photos are of the actual product type that you are ordering) |
Dimensions | |
Depth | 3mm in Plastic |
Height | 750mm |
Material | |
Type | Printed AEGP or HIP Vinyl on Plastic or GRP substrate |
Customer Questions & Answers
Be the first to ask a question.