JSP 1m Webbing Anchorage Sling

This 1m Anchorage sling can be looped around girders, trees, poles and other secure, sufficient structures to provide a convenient and safe anchorage point to attach a karabiner. This is ideal for use in areas with no pre-installed anchor points or where an existing anchor point is not in a required position.

The sling is manufactured from a 20mm wide polyester webbing and has a 20kN breaking strength. It conforms to EN795:2012 Type B. Although the total length of this sling is 1m, it is worth noting that it has been looped, so in reality, it is only 50cm long; if you need something longer, take a look at our 2m long anchorage point sling FAR0504.

If cared for correctly, this sling is designed to have a 10-year lifespan. As with any fall protection equipment, you will need to check the condition of this sling before every use, as sharp and rough surfaces will wear it prematurely and could cause failure when the sling is required the most.