{"title":"Dock Bumpers","description":null,"products":[{"product_id":"non-galvanised-dock-bumper-back-plate-450-x-255-x-15-brown","title":"Non-Galvanised Flat Dock Bumper Back Plate - 450 x 255 x 15 - Brown","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhen installing rubber dock bumpers, it is much easier to replace units attached to a solid backing plate than those affixed directly to concrete. These backing plates allow you to permanently mount the backing plate to your chosen mounting point (they are not galvanised, allowing you to weld them to steel if needed).\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhen rubber dock bumpers eventually wear, they can be unbolted without having to repair damaged concrete anchors that are attached to a weakened surface. \u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThese backing plates come in a range of sizes to match their corresponding dock bumper. Should you need to mount your dock bumper above the level of the loading dock, you can do so with one of our angled brackets that facilitate raising the bumper. \u003c\/span\u003e\u003c\/p\u003e","brand":"Start Traffic","offers":[{"title":"450 x 255 x 15 \/ Non-Galvanised (welded mounting)","offer_id":57491984777589,"sku":"33551","price":80.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/6357\/9458\/files\/polymer-products-A051-non-galvanised-dock-bumper-back-plate-main.jpg?v=1786705316"},{"product_id":"non-galvanised-dock-bumper-back-plate-750-x-250-x-15-brown-or-grey","title":"Non-Galvanised Flat Dock Bumper Back Plate - 750 x 250 x 15","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhen installing rubber dock bumpers, it is much easier to replace units attached to a solid backing plate than those affixed directly to concrete. These backing plates allow you to permanently mount the backing plate to your chosen mounting point (they are not galvanised, allowing you to weld them to steel if needed).\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhen rubber dock bumpers eventually wear, they can be unbolted without having to repair damaged concrete anchors that are attached to a weakened surface. \u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThese backing plates come in a range of sizes to match their corresponding dock bumper. Should you need to mount your dock bumper above the level of the loading dock, you can do so with one of our angled brackets that facilitate raising the bumper. \u003c\/span\u003e\u003c\/p\u003e","brand":"Start Traffic","offers":[{"title":"750 x 250 x 15 \/ Non-Galvanised (welded mounting)","offer_id":57491984875893,"sku":"34447","price":115.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/6357\/9458\/files\/polymer-products-A335-non-galvanised-dock-bumper-back-plate-main_0fa5884e-c6ea-415b-b1ff-18bef132a073.jpg?v=1786708012"},{"product_id":"spring-loaded-dock-bumper-back-plate-720-x-250-x-66","title":"Spring-Loaded Sliding Dock Bumper Back Plate - 720 x 250 x 66","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDesigned to be fitted predominantly to goods out bays, this dock bumper mount has a sliding mechanism that allows the dock bumper to move freely downward as a trailer is loaded. This ensures that the trailer does not under-ride the mount and get lodged in position as goods weigh the suspension down.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe backplate comes supplied with fixings to attach the bumper element, but does not include mounting hardware to attach the unit to your loading bay or wall. \u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis dock bumper is designed to be used with our hard-wearing rubber dock bumper in a standard square format. Mounting of the slider to the loading bay is done by bolting through the back plate at four points. Spare bumper mounting hardware is available should it be required.\u003c\/span\u003e\u003c\/p\u003e","brand":"Start Traffic","offers":[{"title":"720 x 250 x 66","offer_id":57491986022773,"sku":"34608","price":241.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/6357\/9458\/files\/polymer-products-A031-spring-loaded-dock-bumper-back-plate-main.jpg?v=1786699577"},{"product_id":"spring-loaded-dock-bumper-back-plate-965-x-255-x-66","title":"Spring-Loaded Sliding Dock Bumper Back Plate - 965 x 255 x 66","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDesigned to be fitted predominantly to goods out bays, this dock bumper mount has a sliding mechanism that allows the dock bumper to move freely downward as a trailer is loaded. This ensures that the trailer does not under-ride the mount and get lodged in position as goods weigh the suspension down.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe backplate comes supplied with fixings to attach the bumper element, but does not include mounting hardware to attach the unit to your loading bay or wall. \u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis dock bumper is designed to be used with our hard-wearing rubber dock bumper in a standard square format. Mounting of the slider to the loading bay is done by bolting through the back plate at four points. Spare bumper mounting hardware is available should it be required.\u003c\/span\u003e\u003c\/p\u003e","brand":"Start Traffic","offers":[{"title":"965 x 255 x 66","offer_id":57491986055541,"sku":"34479","price":333.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/6357\/9458\/files\/polymer-products-A032-spring-loaded-dock-bumper-back-plate-main.jpg?v=1786704678"},{"product_id":"steel-dock-bumper-back-plate-450-x-255-x-15-galvanised","title":"Steel Flat Dock Bumper Back Plate - 450 x 255 x 15 - Galvanised","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhen installing rubber dock bumpers, it is much easier to replace units attached to a solid backing plate than those affixed directly to concrete. These backing plates allow you to permanently mount the backing plate to your chosen mounting point (they are not galvanised, allowing you to weld them to steel if needed).\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhen rubber dock bumpers eventually wear, they can be unbolted without having to repair damaged concrete anchors that are attached to a weakened surface. \u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThese backing plates come in a range of sizes to match their corresponding dock bumper. Should you need to mount your dock bumper above the level of the loading dock, you can do so with one of our angled brackets that facilitate raising the bumper. \u003c\/span\u003e\u003c\/p\u003e","brand":"Start Traffic","offers":[{"title":"450 x 255 x 15 \/ Galvanised (bolted)","offer_id":57491986088309,"sku":"34480","price":84.52,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/6357\/9458\/files\/polymer-products-A053-steel-dock-bumper-back-plate-main_2.jpg?v=1786701349"},{"product_id":"steel-dock-bumper-back-plate-470-x-275-x-130-galvanised","title":"Channel Mount Steel Dock Bumper Mounting Bracket - 470 x 275 x 130 - Galvanised","description":"\u003cp\u003eThis dock bumper mounting bracket holds a combination front plate that features a high- wear facing and a shock-absorbing backer. The shock-absorbing elements can be easily changed out by sliding them in from the top as and when they need replacement. \u003c\/p\u003e\n\u003cp\u003eThe mounting plate itself is made from durable galvanised steel with four fixing holes. The top two are 25mm diameter for M24 bolts, and the bottom holes are 20mm diameter. The top holes can be used to mount to an angled dock riser bracket. \u003c\/p\u003e\n\u003cp\u003eThis mounting bracket can be mounted to loading docks and provides defence against vehicle impacts. The mount is also compatible with our angled mounting bracket, which allows the backing plate to sit higher when vehicles override a dock at a lower height.\u003cbr\u003e\u003c\/p\u003e","brand":"Start Traffic","offers":[{"title":"470 x 275 x 130","offer_id":57491986121077,"sku":"34481","price":141.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/6357\/9458\/files\/polymer-products-A055-steel-dock-bumper-back-plate-main.jpg?v=1786705471"},{"product_id":"steel-dock-bumper-back-plate-750-x-255-x-15-galvanised","title":"Steel Flat Dock Bumper Back Plate - 750 x 255 x 15 - Galvanised","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhen installing rubber dock bumpers, it is much easier to replace units attached to a solid backing plate than those affixed directly to concrete. These backing plates allow you to permanently mount the backing plate to your chosen mounting point (they are not galvanised, allowing you to weld them to steel if needed).\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhen rubber dock bumpers eventually wear, they can be unbolted without having to repair damaged concrete anchors that are attached to a weakened surface. \u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThese backing plates come in a range of sizes to match their corresponding dock bumper. Should you need to mount your dock bumper above the level of the loading dock, you can do so with one of our angled brackets that facilitate raising the bumper. \u003c\/span\u003e\u003c\/p\u003e","brand":"Start Traffic","offers":[{"title":"750 x 255 x 15 \/ Galvanised (bolted)","offer_id":57491986153845,"sku":"34482","price":114.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/6357\/9458\/files\/polymer-products-A056-steel-dock-bumper-back-plate-main.jpg?v=1786705520"},{"product_id":"steel-dock-bumper-back-plate-760-x-270-x-85-galvanised","title":"Channel Mount Steel Dock Bumper Mounting Bracket - 760 x 270 x 85 - Galvanised","description":"\u003cp\u003eThis dock bumper mounting bracket holds a combination front plate that features a high- wear facing and a shock-absorbing backer. The shock-absorbing elements can be easily changed out by sliding them in from the top as and when they need replacement. \u003c\/p\u003e\n\u003cp\u003eThe mounting plate itself is made from durable galvanised steel with four fixing holes. The top two are 25mm diameter for M24 bolts, and the bottom holes are 20mm diameter. The top holes can be used to mount to an angled dock riser bracket. \u003c\/p\u003e\n\u003cp\u003eThis mounting bracket can be mounted to loading docks and provides defence against vehicle impacts. The mount is also compatible with our angled mounting bracket, which allows the backing plate to sit higher when vehicles override a dock at a lower height.\u003c\/p\u003e","brand":"Start Traffic","offers":[{"title":"760 x 270 x 85","offer_id":57491986186613,"sku":"34483","price":173.77,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/6357\/9458\/files\/polymer-products-A057-steeldock-bumper-back-plate-main.jpg?v=1786705604"},{"product_id":"steel-dock-bumper-back-plate-760-x-270-x-130-red-ral-3020","title":"Channel Mount Steel Dock Bumper Mounting Bracket - 760 x 270 x 130 - Galvanised","description":"\u003cp\u003eThis dock bumper mounting bracket holds a combination front plate that features a high- wear facing and a shock-absorbing backer. The shock-absorbing elements can be easily changed out by sliding them in from the top as and when they need replacement. \u003c\/p\u003e\n\u003cp\u003eThe mounting plate itself is made from durable galvanised steel with four fixing holes. The top two are 25mm diameter for M24 bolts, and the bottom holes are 20mm diameter. The top holes can be used to mount to an angled dock riser bracket. \u003c\/p\u003e\n\u003cp\u003eThis mounting bracket can be mounted to loading docks and provides defence against vehicle impacts. The mount is also compatible with our angled mounting bracket, which allows the backing plate to sit higher when vehicles override a dock at a lower height.\u003c\/p\u003e","brand":"Start Traffic","offers":[{"title":"760 x 270 x 130","offer_id":57491986219381,"sku":"34484","price":181.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/6357\/9458\/files\/polymer-products-A058-steel-dock-bumper-back-plate-main.jpg?v=1786705639"},{"product_id":"steel-rectangular-dock-bumper-front-plate-460-x-255-x-65","title":"Steel Rectangular Dock Bumper Front Plate - 460 x 255 x 65","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTo prevent premature wear of dock bumpers, this steel face plate redirects any abrasion from a reversing trailer into a compressive force that the rubber bumper behind the face plate can absorb. This plate can significantly improve the lifespan of a plain rubber dock bumper.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe plate is made from galvanised steel, which keeps any corrosion firmly at bay. The steel thickness is 12mm, ensuring it does not deform or distort under load. \u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePlease note that this requires an M24 washer instead of the standard washer used with the rubber face plate.\u003c\/span\u003e\u003c\/p\u003e","brand":"Start Traffic","offers":[{"title":"460 x 255 x 65","offer_id":57491986252149,"sku":"34485","price":94.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/6357\/9458\/files\/polymer-products-A035-steel-rectangular-dock-bumper-front-plate-main.jpg?v=1786704793"},{"product_id":"steel-rectangular-dock-bumper-front-plate-440-x-255-x-65","title":"Steel Rectangular Dock Bumper Front Plate - 440 x 255 x 65","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTo prevent premature wear of dock bumpers, this steel face plate redirects any abrasion from a reversing trailer into a compressive force that the rubber bumper behind the face plate can absorb. This plate can significantly improve the lifespan of a plain rubber dock bumper.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe plate is made from galvanised steel, which keeps any corrosion firmly at bay. The steel thickness is 12mm, ensuring it does not deform or distort under load. \u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePlease note that this requires an M24 washer instead of the standard washer used with the rubber face plate.\u003c\/span\u003e\u003c\/p\u003e","brand":"Start Traffic","offers":[{"title":"440 x 255 x 65","offer_id":57491986317685,"sku":"34486","price":94.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/6357\/9458\/files\/polymer-products-A036-steel-rectangular-dock-bumper-front-plate-main.jpg?v=1786704837"},{"product_id":"steel-rectangular-dock-bumper-front-plate-760-x-260-x-60","title":"Steel Rectangular Dock Bumper Front Plate - 760 x 260 x 60","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTo prevent premature wear of dock bumpers, this steel face plate redirects any abrasion from a reversing trailer into a compressive force that the rubber bumper behind the face plate can absorb. This plate can significantly improve the lifespan of a plain rubber dock bumper.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe plate is made from galvanised steel, which keeps any corrosion firmly at bay. The steel thickness is 12mm, ensuring it does not deform or distort under load. \u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePlease note that this requires an M24 washer instead of the standard washer used with the rubber face plate.\u003c\/span\u003e\u003c\/p\u003e","brand":"Start Traffic","offers":[{"title":"760 x 260 x 60","offer_id":57491986350453,"sku":"34487","price":151.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/6357\/9458\/files\/polymer-products-A040-steel-rectangular-dock-bumper-front-plate-main.jpg?v=1786704983"},{"product_id":"black-rubber-dock-bumper-frame-450-x-250-x-100","title":"Black Rubber Dock Bumper Middle Frame Plate - 450 x 250 x 100","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThese rubber bumper frames are the shock-absorbing element that sits behind our push-fit yellow face plates. They can be either directly wall-mounted or mounted to one of our steel backing plates. \u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThese rubber plates provide the shock absorption that is required when vehicles reverse up to them, preventing damage to the loading dock or the vehicle itself. \u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThese are available in two sizes to suit your requirements and do not include any mounting hardware, which will need to be purchased separately.\u003c\/span\u003e\u003c\/p\u003e","brand":"Start Traffic","offers":[{"title":"450 x 250 x 100","offer_id":57491987497333,"sku":"34493","price":48.02,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/6357\/9458\/files\/polymer-products-A294-black-rubber-dock-bumper-frame-main.jpg?v=1786707797"},{"product_id":"black-rubber-dock-bumper-frame-750-x-250-x-100","title":"Black Rubber Dock Bumper Middle Frame Plate - 750 x 250 x 100","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThese rubber bumper frames are the shock-absorbing element that sits behind our push-fit yellow face plates. They can be either directly wall-mounted or mounted to one of our steel backing plates. \u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThese rubber plates provide the shock absorption that is required when vehicles reverse up to them, preventing damage to the loading dock or the vehicle itself. \u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThese are available in two sizes to suit your requirements and do not include any mounting hardware, which will need to be purchased separately.\u003c\/span\u003e\u003c\/p\u003e","brand":"Start Traffic","offers":[{"title":"750 x 250 x 100","offer_id":57491987530101,"sku":"34494","price":70.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/6357\/9458\/files\/polymer-products-A295-black-rubber-dock-bumper-frame-main.jpg?v=1786707847"},{"product_id":"black-rubber-dock-bumper-with-steel-frame-300-x-380-x-105","title":"Black Rubber Dock Bumper With Steel Frame - 300 x 380 x 105","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSome of the best solutions to a problem are often the simplest, and these dock bumpers prove this as their design has been around for a long time. Made from many layers of conveyor belt bolted together into a thick laminate block, these dock bumpers offer excellent protection and shock resistance.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe fibre-reinforced nature of the conveyor material makes them very hardy and able to take repeated impacts day after day in all conditions without significant wear and tear.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe assembly is easy to mount, as it can be bolted directly to a wall or loading bay with suitable fixings. \u003c\/span\u003e\u003c\/p\u003e","brand":"Start Traffic","offers":[{"title":"300 x 380 x 105","offer_id":57491987661173,"sku":"34498","price":74.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/6357\/9458\/files\/polymer-products-A025-black-rubber-dock-bumper-steel-frame-main_bc427e2c-0f87-4e72-a9bb-94b2ac588fa3.jpg?v=1786712548"},{"product_id":"black-rubber-dock-bumper-with-steel-frame-600-x-380-x-105","title":"Black Rubber Dock Bumper With Steel Frame - 600 x 380 x 105","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSome of the best solutions to a problem are often the simplest, and these dock bumpers prove this as their design has been around for a long time. Made from many layers of conveyor belt bolted together into a thick laminate block, these dock bumpers offer excellent protection and shock resistance.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe fibre-reinforced nature of the conveyor material makes them very hardy and able to take repeated impacts day after day in all conditions without significant wear and tear.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe assembly is easy to mount, as it can be bolted directly to a wall or loading bay with suitable fixings. \u003c\/span\u003e\u003c\/p\u003e","brand":"Start Traffic","offers":[{"title":"600 x 380 x 105","offer_id":57491987693941,"sku":"34499","price":140.26,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/6357\/9458\/files\/polymer-products-A026-black-rubber-dock-bumper-steel-frame-main.jpg?v=1786699500"},{"product_id":"black-rubber-dock-bumper-with-steel-frame-900-x-400-x-105","title":"Black Rubber Dock Bumper With Steel Frame - 900 x 400 x 105","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSome of the best solutions to a problem are often the simplest, and these dock bumpers prove this as their design has been around for a long time. Made from many layers of conveyor belt bolted together into a thick laminate block, these dock bumpers offer excellent protection and shock resistance.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe fibre-reinforced nature of the conveyor material makes them very hardy and able to take repeated impacts day after day in all conditions without significant wear and tear.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe assembly is easy to mount, as it can be bolted directly to a wall or loading bay with suitable fixings. \u003c\/span\u003e\u003c\/p\u003e","brand":"Start Traffic","offers":[{"title":"900 x 400 x 105","offer_id":57491987759477,"sku":"34500","price":203.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/6357\/9458\/files\/polymer-products-A027-extra-tall-rubber-dock-bumper-main.jpg?v=1786699529"},{"product_id":"heavy-duty-steel-dock-bumper-620-x-360-x-140","title":"Heavy-Duty Steel \u0026 Rubber Dock Bumper - 620 x 360 x 140","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThese steel-reinforced dock bumpers use a combination of recycled conveyor belt sandwiched between steel plates to provide cushioning and enhanced abrasion resistance at loading docks. \u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe face plate of these dock bumpers features elongated holes, allowing the face plate to compress the rubber core. This reduces the stress placed onto loading docks, preventing damage.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSeveral versions of this assembly are available, with “high rising” versions perfect for stopping taller vehicles from overriding the dock bumper. All steel components are galvanised for corrosion resistance.\u003c\/span\u003e\u003c\/p\u003e","brand":"Start Traffic","offers":[{"title":"620 x 360 x 140","offer_id":57491987890549,"sku":"34504","price":405.69,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/6357\/9458\/files\/polymer-products-A028-heavy-duty-steel-dock-bumper-main.jpg?v=1786704570"},{"product_id":"heavy-duty-steel-dock-bumper-730-x-280-x-140","title":"Heavy-Duty Steel \u0026 Rubber Dock Bumper - 730 x 280 x 140","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThese steel-reinforced dock bumpers use a combination of recycled conveyor belt sandwiched between steel plates to provide cushioning and enhanced abrasion resistance at loading docks. \u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe face plate of these dock bumpers features elongated holes, allowing the face plate to compress the rubber core. This reduces the stress placed onto loading docks, preventing damage.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSeveral versions of this assembly are available, with “high rising” versions perfect for stopping taller vehicles from overriding the dock bumper. All steel components are galvanised for corrosion resistance.\u003c\/span\u003e\u003c\/p\u003e","brand":"Start Traffic","offers":[{"title":"730 x 280 x 140","offer_id":57491987923317,"sku":"34505","price":405.69,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/6357\/9458\/files\/polymer-prodcuts-A029-heavy-duty-steel-dock-bumper-main.jpg?v=1786703984"},{"product_id":"heavy-duty-steel-dock-bumper-960-x-590-x-200","title":"Heavy-Duty Steel \u0026 Rubber Dock Bumper - 960 x 590 x 200","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThese steel-reinforced dock bumpers use a combination of recycled conveyor belt sandwiched between steel plates to provide cushioning and enhanced abrasion resistance at loading docks. \u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe face plate of these dock bumpers features elongated holes, allowing the face plate to compress the rubber core. This reduces the stress placed onto loading docks, preventing damage.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSeveral versions of this assembly are available, with “high rising” versions perfect for stopping taller vehicles from overriding the dock bumper. All steel components are galvanised for corrosion resistance.\u003c\/span\u003e\u003c\/p\u003e","brand":"Start Traffic","offers":[{"title":"960 x 590 x 200","offer_id":57491987956085,"sku":"34506","price":457.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/6357\/9458\/files\/polymer-products-A030-heavy-duty-steel-dock-bumper-main.jpg?v=1786704627"},{"product_id":"shallow-profile-dock-bumper-465-x-275-x-110","title":"Shallow Profile Dock Bumper - 465 x 275 x 110","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis shallow dock bumper is supplied as a complete three-part assembly only requiring suitable bolts to be installed on a loading bay. The slide-in design of this dock bumper allows the face plates to be changed when worn with ease. \u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe three key components that make up this dock bumper include a yellow hard-wearing facing made from cast nylon; this can slide within the assembly, accommodating movement of vehicles and mitigating wear. A rear rubber packer acts as a shock absorber, cushioning the loading bay from impacts that would otherwise cause damage. The steel mounting bracket is a C profile, and can be installed onto any void-free and sound blockwork or concrete surface.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis low profile dock bumper can have its lifespan extended by 50% by flipping the facing pad over once it starts to show wear, shifting the most frequently contacted section of the protector to a different spot. \u003c\/span\u003e\u003c\/p\u003e","brand":"Start Traffic","offers":[{"title":"465 x 275 x 110","offer_id":57491988382069,"sku":"34513","price":258.55,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/6357\/9458\/files\/polymer-products-A021-shallow-profile-dock-bumper-main.jpg?v=1786699265"},{"product_id":"shallow-profile-dock-bumper-465-x-275-x-160","title":"Shallow Profile Dock Bumper - 465 x 275 x 160","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis shallow dock bumper is supplied as a complete three-part assembly only requiring suitable bolts to be installed on a loading bay. The slide-in design of this dock bumper allows the face plates to be changed when worn with ease. \u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe three key components that make up this dock bumper include a yellow hard-wearing facing made from cast nylon; this can slide within the assembly, accommodating movement of vehicles and mitigating wear. A rear rubber packer acts as a shock absorber, cushioning the loading bay from impacts that would otherwise cause damage. The steel mounting bracket is a C profile, and can be installed onto any void-free and sound blockwork or concrete surface.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis low profile dock bumper can have its lifespan extended by 50% by flipping the facing pad over once it starts to show wear, shifting the most frequently contacted section of the protector to a different spot. \u003c\/span\u003e\u003c\/p\u003e","brand":"Start Traffic","offers":[{"title":"465 x 275 x 160","offer_id":57491988676981,"sku":"34514","price":308.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/6357\/9458\/files\/polymer-products-A022-shallow-profile-dock-bumper-main.jpg?v=1786713080"},{"product_id":"yellow-rectangular-polyethylene-dock-bumper-black-rubber-frame-450-x-250-x-115","title":"Yellow Rectangular Polyethylene Dock Bumper (Black Rubber Frame) - 450 x 250 x 115","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis two-part dock bumper is a complete assembly that only requires fixings to get up and in action. The face plate is made from an incredibly durable yellow plastic (ultra-high-molecular-weight polyethene). This face plate not only adds visibility to the product, but also has a low-friction surface, allowing trailers and vehicles to slide up and down against the face without causing damage.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe rear backing plate is made of durable rubber and provides shock absorption against impacts from vehicles butting up against the loading bay. \u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFixings are not included and will need to be purchased separately. When installing fixings, it is essential to keep them as long in the fixing well as possible (this is especially true when using studs, these should be trimmed to not be proud of the nut. These dock bumpers can be installed on any solid surface that is free of voids. \u003c\/span\u003e\u003c\/p\u003e","brand":"Start Traffic","offers":[{"title":"450 x 250 x 115","offer_id":57491989135733,"sku":"34521","price":140.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/6357\/9458\/files\/polymer-products-A019-yellow-rectangular-polyeth-dock-bumper-black-frame-main.jpg?v=1786699160"},{"product_id":"yellow-rectangular-polyethylene-dock-bumper-black-rubber-frame-750-x-250-x-115","title":"Yellow Rectangular Polyethylene Dock Bumper (Black Rubber Frame) - 750 x 250 x 115","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis two-part dock bumper is a complete assembly that only requires fixings to get up and in action. The face plate is made from an incredibly durable yellow plastic (ultra-high-molecular-weight polyethene). This face plate not only adds visibility to the product, but also has a low-friction surface, allowing trailers and vehicles to slide up and down against the face without causing damage.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe rear backing plate is made of durable rubber and provides shock absorption against impacts from vehicles butting up against the loading bay. \u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFixings are not included and will need to be purchased separately. When installing fixings, it is essential to keep them as long in the fixing well as possible (this is especially true when using studs, these should be trimmed to not be proud of the nut. These dock bumpers can be installed on any solid surface that is free of voids. \u003c\/span\u003e\u003c\/p\u003e","brand":"Start Traffic","offers":[{"title":"750 x 250 x 115","offer_id":57491989168501,"sku":"34522","price":183.28,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/6357\/9458\/files\/polymer-products-A020-yellow-rectangular-polyeth-dock-bumper-black-frame-main.jpg?v=1786699210"},{"product_id":"d-shaped-rubber-bumper-50-x-30-x-2500","title":"D-Shaped Rubber Bumper Extrusions - 50 x 30 x 2500","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOur D-shaped rubber bumpers can be used in a range of applications, from loading bays to trolley storage areas; they can be effectively bolted to walls, providing cushioning against impacts.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSupplied in a range of sizes, they can be used to cushion blows, especially where impacts are frequent. The shape of these extrusions means they are naturally flexible when compressed, ensuring anything from boats to wheelie bins are defended against (depending on the extrusion size).\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDue to the method of manufacturing, there can often be some variance in the size of the extrusion (+\/- 5mm) if you have very specific requirements, please contact us prior to purchase. Fixing these bumpers in place involves drilling a small hole through the face and rear, allowing access to secure the stop with a suitable fastener for the surface the bumper is being mounted onto.\u003c\/span\u003e\u003c\/p\u003e","brand":"Start Traffic","offers":[{"title":"50 x 30 x 2500","offer_id":57491989332341,"sku":"34527","price":28.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/6357\/9458\/files\/polymer-products-A106-d-shaped-rubber-bumper-main.jpg?v=1786705796"},{"product_id":"d-shaped-rubber-bumper-70-x-70-x-2440","title":"D-Shaped Rubber Bumper Extrusions - 70 x 70 x 2440","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOur D-shaped rubber bumpers can be used in a range of applications, from loading bays to trolley storage areas; they can be effectively bolted to walls, providing cushioning against impacts.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSupplied in a range of sizes, they can be used to cushion blows, especially where impacts are frequent. The shape of these extrusions means they are naturally flexible when compressed, ensuring anything from boats to wheelie bins are defended against (depending on the extrusion size).\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDue to the method of manufacturing, there can often be some variance in the size of the extrusion (+\/- 5mm) if you have very specific requirements, please contact us prior to purchase. Fixing these bumpers in place involves drilling a small hole through the face and rear, allowing access to secure the stop with a suitable fastener for the surface the bumper is being mounted onto.\u003c\/span\u003e\u003c\/p\u003e","brand":"Start Traffic","offers":[{"title":"70 x 70 x 2440","offer_id":57491989365109,"sku":"34528","price":43.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/6357\/9458\/files\/polymer-products-A108-d-shaped-rubber-bumper-main.jpg?v=1786705833"},{"product_id":"d-shaped-rubber-bumper-100-x-98-x-2440","title":"D-Shaped Rubber Bumper Extrusions - 100 x 98 x 2440","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOur D-shaped rubber bumpers can be used in a range of applications, from loading bays to trolley storage areas; they can be effectively bolted to walls, providing cushioning against impacts.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSupplied in a range of sizes, they can be used to cushion blows, especially where impacts are frequent. The shape of these extrusions means they are naturally flexible when compressed, ensuring anything from boats to wheelie bins are defended against (depending on the extrusion size).\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDue to the method of manufacturing, there can often be some variance in the size of the extrusion (+\/- 5mm) if you have very specific requirements, please contact us prior to purchase. Fixing these bumpers in place involves drilling a small hole through the face and rear, allowing access to secure the stop with a suitable fastener for the surface the bumper is being mounted onto.\u003c\/span\u003e\u003c\/p\u003e","brand":"Start Traffic","offers":[{"title":"100 x 98 x 2440","offer_id":57491989397877,"sku":"34529","price":69.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/6357\/9458\/files\/polymer-products-A109-d-shaped-rubber-bumper-main.jpg?v=1786705867"},{"product_id":"d-shaped-rubber-bumper-96-x-104-x-1000","title":"D-Shaped Rubber Bumper Extrusions - 96 x 104 x 1000","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOur D-shaped rubber bumpers can be used in a range of applications, from loading bays to trolley storage areas; they can be effectively bolted to walls, providing cushioning against impacts.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSupplied in a range of sizes, they can be used to cushion blows, especially where impacts are frequent. The shape of these extrusions means they are naturally flexible when compressed, ensuring anything from boats to wheelie bins are defended against (depending on the extrusion size).\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDue to the method of manufacturing, there can often be some variance in the size of the extrusion (+\/- 5mm) if you have very specific requirements, please contact us prior to purchase. Fixing these bumpers in place involves drilling a small hole through the face and rear, allowing access to secure the stop with a suitable fastener for the surface the bumper is being mounted onto.\u003c\/span\u003e\u003c\/p\u003e","brand":"Start Traffic","offers":[{"title":"96 x 104 x 1000","offer_id":57491989430645,"sku":"34530","price":40.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/6357\/9458\/files\/polymer-products-A110-d-shaped-rubber-bumper-main_8e481457-a7f3-4d60-80c1-aee16fc65570.jpg?v=1786705923"},{"product_id":"d-shaped-rubber-bumper-96-x-104-x-2000","title":"D-Shaped Rubber Bumper Extrusions - 96 x 104 x 2000","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOur D-shaped rubber bumpers can be used in a range of applications, from loading bays to trolley storage areas; they can be effectively bolted to walls, providing cushioning against impacts.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSupplied in a range of sizes, they can be used to cushion blows, especially where impacts are frequent. The shape of these extrusions means they are naturally flexible when compressed, ensuring anything from boats to wheelie bins are defended against (depending on the extrusion size).\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDue to the method of manufacturing, there can often be some variance in the size of the extrusion (+\/- 5mm) if you have very specific requirements, please contact us prior to purchase. Fixing these bumpers in place involves drilling a small hole through the face and rear, allowing access to secure the stop with a suitable fastener for the surface the bumper is being mounted onto.\u003c\/span\u003e\u003c\/p\u003e","brand":"Start Traffic","offers":[{"title":"96 x 104 x 2000","offer_id":57491990970741,"sku":"34531","price":72.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/6357\/9458\/files\/polymer-products-A111-d-shaped-rubber-bumper-main.jpg?v=1786705946"},{"product_id":"d-shaped-rubber-bumper-95-x-82-x-3000","title":"D-Shaped Rubber Bumper Extrusions - 95 x 82 x 3000","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOur D-shaped rubber bumpers can be used in a range of applications, from loading bays to trolley storage areas; they can be effectively bolted to walls, providing cushioning against impacts.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSupplied in a range of sizes, they can be used to cushion blows, especially where impacts are frequent. The shape of these extrusions means they are naturally flexible when compressed, ensuring anything from boats to wheelie bins are defended against (depending on the extrusion size).\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDue to the method of manufacturing, there can often be some variance in the size of the extrusion (+\/- 5mm) if you have very specific requirements, please contact us prior to purchase. Fixing these bumpers in place involves drilling a small hole through the face and rear, allowing access to secure the stop with a suitable fastener for the surface the bumper is being mounted onto.\u003c\/span\u003e\u003c\/p\u003e","brand":"Start Traffic","offers":[{"title":"95 x 82 x 3000","offer_id":57491991036277,"sku":"34532","price":105.31,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/6357\/9458\/files\/polymer-products-A114-d-shaped-rubber-bumper-main.jpg?v=1786706038"},{"product_id":"d-shaped-rubber-bumper-100-x-85-x-2500","title":"D-Shaped Rubber Bumper Extrusions - 100 x 85 x 2500","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOur D-shaped rubber bumpers can be used in a range of applications, from loading bays to trolley storage areas; they can be effectively bolted to walls, providing cushioning against impacts.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSupplied in a range of sizes, they can be used to cushion blows, especially where impacts are frequent. The shape of these extrusions means they are naturally flexible when compressed, ensuring anything from boats to wheelie bins are defended against (depending on the extrusion size).\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDue to the method of manufacturing, there can often be some variance in the size of the extrusion (+\/- 5mm) if you have very specific requirements, please contact us prior to purchase. Fixing these bumpers in place involves drilling a small hole through the face and rear, allowing access to secure the stop with a suitable fastener for the surface the bumper is being mounted onto.\u003c\/span\u003e\u003c\/p\u003e","brand":"Start Traffic","offers":[{"title":"100 x 85 x 2500","offer_id":57491991069045,"sku":"34533","price":78.26,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/6357\/9458\/files\/polymer-products-A115-d-shaped-rubber-bumper-main_e78163bb-bcca-475d-b115-da2f75268f44.jpg?v=1786706262"},{"product_id":"d-shaped-rubber-bumper-150-x-150-x-2000","title":"D-Shaped Rubber Bumper Extrusions - 150 x 150 x 2000","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOur D-shaped rubber bumpers can be used in a range of applications, from loading bays to trolley storage areas; they can be effectively bolted to walls, providing cushioning against impacts.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSupplied in a range of sizes, they can be used to cushion blows, especially where impacts are frequent. The shape of these extrusions means they are naturally flexible when compressed, ensuring anything from boats to wheelie bins are defended against (depending on the extrusion size).\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDue to the method of manufacturing, there can often be some variance in the size of the extrusion (+\/- 5mm) if you have very specific requirements, please contact us prior to purchase. Fixing these bumpers in place involves drilling a small hole through the face and rear, allowing access to secure the stop with a suitable fastener for the surface the bumper is being mounted onto.\u003c\/span\u003e\u003c\/p\u003e","brand":"Start Traffic","offers":[{"title":"150 x 150 x 2000","offer_id":57491991101813,"sku":"34534","price":224.11,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/6357\/9458\/files\/polymer-products-A118-d-shaped-rubber-bumper-main.jpg?v=1786706117"},{"product_id":"d-shaped-rubber-bumper-75-x-30-x-3000","title":"D-Shaped Rubber Bumper Extrusions - 75 x 30 x 3000","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOur D-shaped rubber bumpers can be used in a range of applications, from loading bays to trolley storage areas; they can be effectively bolted to walls, providing cushioning against impacts.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSupplied in a range of sizes, they can be used to cushion blows, especially where impacts are frequent. The shape of these extrusions means they are naturally flexible when compressed, ensuring anything from boats to wheelie bins are defended against (depending on the extrusion size).\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDue to the method of manufacturing, there can often be some variance in the size of the extrusion (+\/- 5mm) if you have very specific requirements, please contact us prior to purchase. Fixing these bumpers in place involves drilling a small hole through the face and rear, allowing access to secure the stop with a suitable fastener for the surface the bumper is being mounted onto.\u003c\/span\u003e\u003c\/p\u003e","brand":"Start Traffic","offers":[{"title":"75 x 30 x 3000","offer_id":57491991134581,"sku":"34535","price":47.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/6357\/9458\/files\/polymer-products-A366-d-shaped-rubber-bumper-main.jpg?v=1786708090"},{"product_id":"d-shaped-rubber-bumper-92-x-95-x-3000","title":"D-Shaped Rubber Bumper Extrusions - 92 x 95 x 3000","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOur D-shaped rubber bumpers can be used in a range of applications, from loading bays to trolley storage areas; they can be effectively bolted to walls, providing cushioning against impacts.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSupplied in a range of sizes, they can be used to cushion blows, especially where impacts are frequent. The shape of these extrusions means they are naturally flexible when compressed, ensuring anything from boats to wheelie bins are defended against (depending on the extrusion size).\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDue to the method of manufacturing, there can often be some variance in the size of the extrusion (+\/- 5mm) if you have very specific requirements, please contact us prior to purchase. Fixing these bumpers in place involves drilling a small hole through the face and rear, allowing access to secure the stop with a suitable fastener for the surface the bumper is being mounted onto.\u003c\/span\u003e\u003c\/p\u003e","brand":"Start Traffic","offers":[{"title":"92 x 95 x 3000","offer_id":57491991167349,"sku":"34536","price":104.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/6357\/9458\/files\/polymer-products-A384-d-shaped-rubber-bumper-main.jpg?v=1786708153"},{"product_id":"black-rubber-general-purpose-hgv-bumper-105-x-25-x-38","title":"Black Rubber General Purpose HGV Bumper - 105 x 25 x 38","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThese cost-effective rubber bumpers can be fitted to a variety of heavy goods vehicles for a variety of reasons, offering protection against opening doors, wheelie bins, and other sources of contact.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTheir simple construction and fitting method means they can be bolted to chassis rails, trailer beds and many other locations with ease. Their installation is not just limited to vehicles; they can be installed on machinery or in production areas as a cost-effective bumper to defend against repeated impacts from trolleys, bins, and other equipment.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eChoose from a range of sizes to best suit your requirements.\u003c\/span\u003e\u003c\/p\u003e","brand":"Start Traffic","offers":[{"title":"105 x 25 x 38","offer_id":57491991495029,"sku":"34540","price":3.03,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/6357\/9458\/files\/polymer-products-A170-black-rubber-gen-purpose-hgv-bumper-main.jpg?v=1786706738"},{"product_id":"black-rubber-general-purpose-hgv-bumper-110-x-25-x-42","title":"Black Rubber General Purpose HGV Bumper - 110 x 25 x 42","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThese cost-effective rubber bumpers can be fitted to a variety of heavy goods vehicles for a variety of reasons, offering protection against opening doors, wheelie bins, and other sources of contact.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTheir simple construction and fitting method means they can be bolted to chassis rails, trailer beds and many other locations with ease. Their installation is not just limited to vehicles; they can be installed on machinery or in production areas as a cost-effective bumper to defend against repeated impacts from trolleys, bins, and other equipment.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eChoose from a range of sizes to best suit your requirements.\u003c\/span\u003e\u003c\/p\u003e","brand":"Start Traffic","offers":[{"title":"110 x 25 x 42","offer_id":57491991527797,"sku":"34541","price":4.37,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/6357\/9458\/files\/polymer-products-A171-black-rubber-gen-purpose-hgv-bumper-main.jpg?v=1786706843"},{"product_id":"yellow-polyethylene-trailer-plate-1000-x-1000-x-20","title":"Yellow Polyethylene Trailer Plate - 1000 x 1000 x 20","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis trailer plate can prevent damage to concrete and tarmac surfaces caused by landing legs where trailers are parked. Wear from landing legs on concrete and tarmac can be costly to repair; this is especially true on tarmac, where repeated weight in the same spot can cause the surface to sink.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis plate spreads the load and, with its incredible abrasion resistance, reduces scuffing to the surface. The bright colour also helps drivers align the trailer, as they can clearly see the location of the pads. Each pad is 1000x1000mm square, and has a total thickness of 20mm. The edges are chamfered to prevent trips, and installation is simple: it bolts into place with 16 fixings.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe fixings required for each plate are available separately and are M10 x 105 mm countersunk anchor bolts. The bolt-down nature of this product means no expensive excavations are needed, and anyone with an SDS drill and driver can install them without specialist knowledge or tools. \u003c\/span\u003e\u003c\/p\u003e","brand":"Start Traffic","offers":[{"title":"1000 x 1000 x 20","offer_id":57491992674677,"sku":"34573","price":231.37,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/6357\/9458\/files\/polymer-products-A084-yellow-polyethylene-trailer-plate-main.jpg?v=1786705756"},{"product_id":"yellow-polyethylene-trailer-plate-1000-x-1500-x-20","title":"Yellow Polyethylene Trailer Plate - 1000 x 1500 x 20","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis trailer plate can prevent damage to concrete and tarmac surfaces caused by landing legs where trailers are parked. Wear from landing legs on concrete and tarmac can be costly to repair; this is especially true on tarmac, where repeated weight in the same spot can cause the surface to sink.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis plate spreads the load and, with its incredible abrasion resistance, reduces scuffing to the surface. The bright colour also helps drivers align the trailer, as they can clearly see the location of the pads. Each pad is 1000x1000mm square, and has a total thickness of 20mm. The edges are chamfered to prevent trips, and installation is simple: it bolts into place with 16 fixings.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe fixings required for each plate are available separately and are M10 x 105 mm countersunk anchor bolts. The bolt-down nature of this product means no expensive excavations are needed, and anyone with an SDS drill and driver can install them without specialist knowledge or tools. \u003c\/span\u003e\u003c\/p\u003e","brand":"Start Traffic","offers":[{"title":"1000 x 1500 x 20","offer_id":57491992707445,"sku":"34574","price":363.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0860\/6357\/9458\/files\/polymer-products-A084-yellow-polyethylene-trailer-plate-main.jpg?v=1786705756"}],"url":"https:\/\/startsafety.uk\/collections\/dock-bumpers.oembed?page=2","provider":"Start Safety UK","version":"1.0","type":"link"}